DIE HARD Nakatomi Plaza Christmas Tree Topper

etcrespo
2023-12-10
- Christmas2023
- Die Hard
- Christmas tree
- Memorabilia
I designed this X-Mas Tree Topper in tribute to one of the GREATEST
Christmas Movies of all time! Yes DIE HARD is a Christmas Movie!!!
Stl file includes huge tower and almost nano size chopper that must
be split and printed separately at different layer height and brim.
Printer: Longer3D Lk5 Pro, Dual Z, 3dTouch
Firmware: Klipper via pi4b
Software: 3D Builder – Orcaslicer
Filament: PETG – Brand: Teqstone (Geeetech) Silver &
Generic black PLA for the chopper.
Printer Settings
Nozzle Diameter: .4
Retraction: 6.5@50mms
Ext. Type: Bowden
Nozzle temp: 235c
Bed temp: 75c
Layer height: .20
Init. Speed: 20mms
Print Speed: 60mms
Walls: 2 or 3
Infill: 15% lightning.
This is designed to be
hollow. Infill only needed to
support the uppermost
ceiling and roof areas.
Additionally, remove all
bottom layers.
Supports Optional
Only enabled to avoid floating parts error messages.
Support: 1% threshold.
Type: any
Brim: 8 loops
Type: outside only
Chopper Settings
Layer height: .08. Walls: 2. Brim: inside only
*ALL OTHER SETTINGS REMAIN THE SAME
Files
Die-Hard-Nakatomi-Christmas-Tree-Topper-1 .stl
300.00*120.53*167.72 mm | 2 Downloads
Comentários (0)