santa claus's advent wreath

Vinc20202

2024-01-02

Contest Entries

Licença: CC BY

Relatar

Christmas2023

Intro:

I thought I could combine beautiful Christmas decorations with a practical Advent wreath. The result: Santa's Advent Wreath. The whole thing includes four 3D printable tealight-candle holders. Printing instructions follow, assembly instructions can be found ont the end. My santa isn't colored because of time problems.(on my pictures, the light on the santa doesn't goes well into the slits. that is fixed in the files)

Printing instruction:

Layer height: 0.2

Support: on the tealight holders with numbers, on the deers, on the santas and on the deerholders yes, on the rest no (on the print bed only)

Infill: minimum 20%

Printing List:

3x deer

3x flipped deer

4x candle holder

1x sledge outside

1x sledge outside flipped

1x sledge middle

1x all the parts of the deerholder (1-3)

3x deer stabilizer

1x santa

1x santa flipped

1x santa stabalizer

INSTRUCTIONS

first, nimm all the parts of the sledge

then, put them together. if that doesn't work, use a hammer. be gently.Then, glue the three parts of the holder togehther. i addet tape, so i can go further

then, put the holder on three dears and put the deer-stabilizers into the holes of the deers. be sure to first put the deer-stabilizers into the hodler-holes. here you can also use a hammer. then put the other three dears on the top (here you can also use a hammer). it should look now like this.

then, put the beginning of the deer-holder into the sledge.

then, assembe the santa. for that, put the santa stabilizer in the holes of both santas.now you can put the santa into the holes. be gently, something could break!

now you can put the tealights into the candle-holders and put them on the top of the deers and on the santa . Your'e finished!

Files

santa flipped .stl

101.17*5.10*88.70 mm | 16 Downloads
santa .stl

101.17*5.10*88.70 mm | 14 Downloads
deerholder 2 .stl

115.41*37.40*38.26 mm | 14 Downloads
deerholder 1 .stl

131.37*37.40*38.26 mm | 14 Downloads
deerholder 3 .stl

165.75*37.40*38.26 mm | 14 Downloads
candle holder .stl

44.00*13.00*44.00 mm | 14 Downloads
deer .stl

148.71*5.76*125.98 mm | 14 Downloads
sledge middle .stl

148.46*78.20*88.72 mm | 14 Downloads
deer flipped .stl

148.71*5.76*125.98 mm | 15 Downloads
sledge side flipped .stl

172.05*5.10*112.36 mm | 14 Downloads
sledge side .stl

172.05*5.10*112.36 mm | 14 Downloads
deer stabilizer .stl

37.40*5.10*5.10 mm | 14 Downloads
santa stabilizer .stl

30.20*5.10*5.10 mm | 14 Downloads

Comentários (1)

gokuntk

2024-01-29 07:23:53

Hi bro someone made a fake account and got my money. if you have a similar experience let me know and contact me through my email gokuntk@gmail.com