Hi all,

Happy charismas and happy New Year all, first of all, check out this video:  https://youtu.be/TdhESna6JZ0 cool right?

I come here to share a fully 3d printed gift box idea, that you can also customize, I provided .step files for editing. you can scale up the model and change the internals, all the design files and .stl and .step files are available to download here for free,

• Printer : Anycubic Kobra 2 Neo
• Slicer : Anycubic slicer
• Filament : Numanker PLA+ (Orange), WOL3D PLA PRO+ (White)
• Layer height :0.2mmPrint
• Print Speed :150mm/s
• Support : No
• Bed : 60 c
• Extruder : 195 c
• Fan : 100%
• Infill : 50%

NOTE: When you print the name tag it is recommended to print it at a low speed

aim also provide 2 nameplate examples xmas.STL  and 2024.STL, You can still customize it as you like

Here is the step-by-step guide for the assembly process

Step 1

3D Print all the files. You can use the JLC 3d printing service called JLC3DP. When you 3D print the box_walls.STL you must need to have a good first layer. I recommended to 3d printing it in different colors for an attractive look  

Step 2

Use a small metal wire with less than 1mm radius to connect the hinge between the box bottom and side walls

Step 3

Cut the wire at the end and bend the wire with a nose plier

Do the same for all 4 sides        

Step 4  

Put some glue on the back side of the top ribbon

Step 5

Press the top ribbon on the top cover

Step 6

Put some glue on the ribbon loop

Step 7                

Press the ribbon loop to the ribbon on the top cover

Step 8

Bend all four corners of the box wall      

Step 9

Close all down with the top cover on

Step 10

Cut the side ribbon tabs

Step 11

Apply some glue on the side ribbon

Step 12

Press down the side-ribbon into the side walls. do it on all the 4 sides

Step 13

Apply some glue to the bottom of the name plate

Step 14

Press it down to the tree model

We just completed the full assembly of our project

Step 15

Put the model in the box and close down the side walls

Step 16

Close down with the top cap

Now we just completed our build and now build it for your loved ones