santa claus's advent wreath
Vinc20202
2024-01-02
- Christmas2023
Intro:
I thought I could combine beautiful Christmas decorations with a practical Advent wreath. The result: Santa's Advent Wreath. The whole thing includes four 3D printable tealight-candle holders. Printing instructions follow, assembly instructions can be found ont the end. My santa isn't colored because of time problems.(on my pictures, the light on the santa doesn't goes well into the slits. that is fixed in the files)
Printing instruction:
Layer height: 0.2
Support: on the tealight holders with numbers, on the deers, on the santas and on the deerholders yes, on the rest no (on the print bed only)
Infill: minimum 20%
Printing List:
3x deer
3x flipped deer
4x candle holder
1x sledge outside
1x sledge outside flipped
1x sledge middle
1x all the parts of the deerholder (1-3)
3x deer stabilizer
1x santa
1x santa flipped
1x santa stabalizer
INSTRUCTIONS
first, nimm all the parts of the sledge
then, put them together. if that doesn't work, use a hammer. be gently.Then, glue the three parts of the holder togehther. i addet tape, so i can go further
then, put the holder on three dears and put the deer-stabilizers into the holes of the deers. be sure to first put the deer-stabilizers into the hodler-holes. here you can also use a hammer. then put the other three dears on the top (here you can also use a hammer). it should look now like this.
then, put the beginning of the deer-holder into the sledge.
then, assembe the santa. for that, put the santa stabilizer in the holes of both santas.now you can put the santa into the holes. be gently, something could break!
now you can put the tealights into the candle-holders and put them on the top of the deers and on the santa . Your'e finished!
Files
santa flipped .stl
101.17*5.10*88.70 mm | 16 Descargas
santa .stl
101.17*5.10*88.70 mm | 14 Descargas
deerholder 2 .stl
115.41*37.40*38.26 mm | 14 Descargas
deerholder 1 .stl
131.37*37.40*38.26 mm | 14 Descargas
deerholder 3 .stl
165.75*37.40*38.26 mm | 14 Descargas
candle holder .stl
44.00*13.00*44.00 mm | 14 Descargas
deer .stl
148.71*5.76*125.98 mm | 14 Descargas
sledge middle .stl
148.46*78.20*88.72 mm | 14 Descargas
deer flipped .stl
148.71*5.76*125.98 mm | 15 Descargas
sledge side flipped .stl
172.05*5.10*112.36 mm | 14 Descargas
sledge side .stl
172.05*5.10*112.36 mm | 14 Descargas
deer stabilizer .stl
37.40*5.10*5.10 mm | 14 Descargas
santa stabilizer .stl
30.20*5.10*5.10 mm | 14 Descargas
Comentarios (1)
gokuntk
2024-01-29 07:23:53
Hi bro someone made a fake account and got my money. if you have a similar experience let me know and contact me through my email gokuntk@gmail.com