This website requires JavaScript.
クーポン
featured

    santa claus's advent wreath

    head sculpture

    Vinc20202

    2024-01-02

    read_icon 92
    20
    category Contest Entries
    copyright ライセンス: CC BY
    report レポート
    • Christmas2023

    Intro:

    I thought I could combine beautiful Christmas decorations with a practical Advent wreath. The result: Santa's Advent Wreath. The whole thing includes four 3D printable tealight-candle holders. Printing instructions follow, assembly instructions can be found ont the end. My santa isn't colored because of time problems.(on my pictures, the light on the santa doesn't goes well into the slits. that is fixed in the files)


    Printing instruction:

    Layer height: 0.2

    Support: on the tealight holders with numbers, on the deers, on the santas and on the deerholders  yes, on the rest no (on the print bed only)

    Infill: minimum 20%


    Printing List:

    3x deer

    3x flipped deer

    4x candle holder

    1x sledge outside

    1x sledge outside flipped

    1x sledge middle

    1x all the parts of the deerholder (1-3)

    3x deer stabilizer

    1x santa

    1x santa flipped

    1x santa stabalizer


    INSTRUCTIONS

    first, nimm all the parts of the sledge


    then, put them together. if that doesn't work, use a hammer. be gently.Then, glue the three parts of the holder togehther. i addet tape, so i can go further

      then, put the holder on three dears and put the deer-stabilizers into the holes of the deers. be sure to first put the deer-stabilizers into the hodler-holes. here you can also use a hammer. then put the other three dears on the top (here you can also use a hammer). it should look now like this.

    then, put the beginning of the deer-holder into the sledge.

    then, assembe the santa. for that, put the santa stabilizer in the holes of both santas.now you can put the santa into the holes. be gently, something could break!

    now you can put the tealights into the candle-holders and put them on the top of the deers and on the santa . Your'e finished!

    Files

    • santa flipped .stl

      101.17*5.10*88.70 mm | 16 ダウンロード

    • santa .stl

      101.17*5.10*88.70 mm | 14 ダウンロード

    • deerholder 2 .stl

      115.41*37.40*38.26 mm | 14 ダウンロード

    • deerholder 1 .stl

      131.37*37.40*38.26 mm | 14 ダウンロード

    • deerholder 3 .stl

      165.75*37.40*38.26 mm | 14 ダウンロード

    • candle holder .stl

      44.00*13.00*44.00 mm | 14 ダウンロード

    • deer .stl

      148.71*5.76*125.98 mm | 14 ダウンロード

    • sledge middle .stl

      148.46*78.20*88.72 mm | 14 ダウンロード

    • deer flipped .stl

      148.71*5.76*125.98 mm | 15 ダウンロード

    • sledge side flipped .stl

      172.05*5.10*112.36 mm | 14 ダウンロード

    • sledge side .stl

      172.05*5.10*112.36 mm | 14 ダウンロード

    • deer stabilizer .stl

      37.40*5.10*5.10 mm | 14 ダウンロード

    • santa stabilizer .stl

      30.20*5.10*5.10 mm | 14 ダウンロード

    コメント (1)

    • head sculpture

      gokuntk

      2024-01-29 15:23:53

      Hi bro someone made a fake account and got my money. if you have a similar experience let me know and contact me through my email gokuntk@gmail.com