3D Printing Brims, Skirts, and Rafts: How to Use Them?
4 min
- What are brims, skirts, and rafts in 3D printing
- How to choose
- Optimize settings
3D printing warping is a common problem in 3D printing. In order to effectively prevent warping at the bottom of the part and increase the adhesion of the build plate, 3D printing brims, skirts, and rafts are usually designed based on the printed object. So what are they and how to choose? This article will help you solve this problem.
Source: https://3dprintmentor.com/3d-printing-raft-vs-brim-vs-skirt/
What are brims, skirts, and rafts in 3D printing
3D printing brim is a series of lines printed around the bottom of the model, forming a large ring, similar to a brim. These lines increase the surface area of the first layer and help to firmly fix the model to the build plate. Its purpose is to improve adhesion and minimize warping, and it is used for models with small bases or sharp corners that are prone to warping. The brim and the bottom of the model are parallel and can be easily removed after printing.
3D printing skirt is a contour printed around the model, but does not touch the model, so it has no effect on structural support. The purpose of the skirt is to test the nozzle, adjust the filament flow rate, and verify that the print bed is level to prevent warping problems.
3D printing raft is a flat, grid-like structure that is printed underneath a model. It provides a solid foundation, especially for models with uneven or small bases. The purpose of a raft is to provide a stable platform and enhance adhesion, making it best suited for large prints, materials that are prone to warping, or uneven build surfaces. Rafts are printed directly underneath a model, but are more difficult to remove than brims and skirts.
How to choose
Use a 3D printing brim when printing with materials like ABS or PETG that are prone to warping, or when your model has a small contact area with the build plate. Brims provide additional adhesion without complicating post-processing. For models that already have excellent adhesion, testing filament flow and consistency before starting a print, ensuring proper bed leveling, and 3D printing skirts are recommended for troubleshooting. Use a 3D printing raft when printing with materials like nylon or flexible filament TPU that require additional stability, or when working on build plates that have bonding issues or printing models with uneven or small bases.
Optimize settings
Brims
Brims can be understood as a special type of skirt in slicing software (set the distance of the skirt to 0 from the edge of the part). In most slicer settings, the default width of the brim is about 8 mm. Generally speaking, the wider the brim, the better the first layer adhesion, but it also consumes more material. After printing, the brim can usually be peeled off manually to minimize surface marks. If the edge removal leaves marks on the printed part, sanding can help smooth the edge.
Skirts
Slicing programs provide a variety of skirt settings, including line count, distance, and number of layers. Increasing the number of lines helps to confirm the initial settings of the print, the skirt distance controls its separation from the part, and the number of layers is usually one layer, but multi-layer skirts are easier to remove. When printing, the skirt is used to pre-condition the nozzle and is easily removed after completion without being attached to the printed object. If removal is difficult, increase the number of skirt layers or use a scraper to assist.
Rafts
Most slicing software comes with a raft design function, and users do not need to create it manually. The key parameters of the raft include layer thickness, air gap, extra margin, and print speed. The bottom layer is the thickest to enhance adhesion, and the top layer thickness matches the printed layer. The extra margin increases the raft area, thereby improving stability, and reducing the print speed helps improve the adhesion of the raft. The air gap is critical for removing the raft. It is the air between the top layer of the raft and the bottom layer of the print, which weakens the adhesion between the two. If the raft is found to have fused to the print, it may be because the printing temperature is too high.
By properly selecting and optimizing the 3D printing brim, skirt and raft, the problem of printing warping can be reduced and the printing success rate can be significantly improved. If you need to print a complex model using a material that is prone to warping, JLC3DP's high-quality 3D printing service can help you solve possible problems in post-processing and provide full support for your creativity!
Keep Learning
3MF VS STL: Which File Format Is Better for 3D Printing?
In the additive manufacturing industry, the STL format has served as the de facto standard for decades. However, the rapid evolution of modern 3D printing has highlighted its technical limitations. Consequently, the 3MF format—backed by an industry consortium including Microsoft, HP, and Ultimaker—has emerged as a robust, next-generation alternative. When exporting a 3D model from CAD or preparing it within a slicer, understanding the technical nuances of 3MF VS STL is critical. This article provides ......
Design for Additive Manufacturing: A Practical DfAM Guide
Key Takeaways DfAM is not DFM: Design for additive manufacturing focuses on exploiting AM's geometric freedom rather than simply simplifying parts. Build orientation matters: Orientation affects strength, surface finish, supports, thermal distortion, and overall cost. Design for the process: Wall thickness, overhangs, holes, clearances, and tolerances must match the specific AM technology and material. Complexity can reduce cost: Part consolidation, lattices, and internal channels can deliver value th......
How to 3D Print a Fidget Ball: Best Settings, Troubleshooting & HelixCore Example
Key Takeaways PLA is the best starting material for most print-in-place fidget balls. Practical layer and nozzle settings: A 0.15–0.2 mm layer height and 0.4 mm nozzle are practical starting points for detailed FDM fidget balls. Clearance drives success: Clearance, extrusion consistency, and first-layer accuracy have a major impact on whether moving parts release successfully. Validate before committing: Do not assume 0.2–0.4 mm clearance works for every printer or material; clearance must be validate......
Design for Manufacturing (DFM): 7 Principles, Process & Practical Guide
Key Takeaways Standard PETG is best suited for continuous use below ~60℃; performance can decline as temperatures approach 70℃. PETG typically has a Tg of ~75–85℃ and an HDT of ~65–75℃, depending on the material grade and test conditions. HDT is not a maximum service temperature—load, print orientation, wall thickness, geometry, and exposure time all affect real-world performance. PETG offers better heat resistance than PLA but lower heat resistance than ABS, ASA, PA12-CF, PC, and PEEK. For sustained ......
How to 3D Print a Perfect Airless Basketball Without Failing
To figure out how to 3D print an airless basketball that actually bounces, you need four things: A proven airless basketball STL A bounce-optimized material (TPU or PEBA) Correct print settings A lattice structure designed for energy return Most failed prints are not caused by the printer itself. They fail because the material or structure cannot efficiently return energy during impact. This guide breaks down the exact community-tested STL files, the ultimate showdown between TPU and PEBA materials, a......
How to 3D Print Large Objects Beyond Your Printer’s Size
Every maker hits this moment. You design something ambitious. A full-size prop. A car interior panel. A furniture joint. A mold that actually fits the real part. You hit “slice”… and then reality shows up. The model is bigger than your build plate. That’s the big challenge of going big. 3D printing large objects sounds simple until you try it. Your printer doesn’t suddenly grow just because your idea did. And scaling a model isn’t the same as successfully 3D printing at large scale. Once parts get big......