The Strongest 3D Printer Filament You Can 3D Print at Home
4 min
When it comes to 3D printing, strength is a key factor for functional parts, prototypes, or items that need to withstand stress. While many filaments are strong, some stand out for their exceptional durability and mechanical properties. Here's a breakdown of the strongest 3D printer filaments you can use at home:
1. Polycarbonate (PC)
● Strength: Extremely strong and impact-resistant.
● Features: High heat resistance (up to 110°C), excellent toughness, and transparency options.
● Best For: Functional parts, automotive components, and protective gear.
● Printing Tips: Requires a high-temperature nozzle (260–310°C) and a heated bed (90–120°C). Use an enclosure to prevent warping.
● Strength: High tensile strength and flexibility.
● Features: Durable, abrasion-resistant, and good layer adhesion.
● Best For: Gears, hinges, and mechanical parts.
● Printing Tips: Print at 240–260°C with a heated bed (70–90°C). Nylon is hygroscopic, so keep it dry before printing.
3. PETG (Polyethylene Terephthalate Glycol)
● Strength: Strong, impact-resistant, and flexible.
● Features: Combines the strength of ABS with the ease of printing of PLA. Resistant to moisture and chemicals.
● Best For: Functional parts, outdoor use, and containers.
● Printing Tips: Print at 220–250°C with a heated bed (70–80°C). Minimal warping and no enclosure needed.
4. TPU (Thermoplastic Polyurethane)
● Strength: Extremely flexible and durable.
● Features: High elasticity, abrasion resistance, and shock absorption.
● Best For: Phone cases, seals, gaskets, and wearables.
● Printing Tips: Print at 220–250°C with a slow print speed. Use a direct-drive extruder for best results.
5. Carbon Fiber Reinforced Filaments
● Strength: Exceptionally strong and stiff.
● Features: Carbon fiber particles embedded in materials like PLA, PETG, or nylon for added strength and rigidity.
● Best For: High-stress parts, drones, and automotive components.
● Printing Tips: Requires a hardened steel nozzle (carbon fiber is abrasive). Print at higher temperatures (varies by base material).
6. ASA (Acrylonitrile Styrene Acrylate)
● Strength: Strong and UV-resistant.
● Features: Similar to ABS but with better weather resistance and less warping.
● Best For: Outdoor parts, automotive components, and functional prototypes.
● Printing Tips: Print at 240–260°C with a heated bed (90–110°C). Use an enclosure to minimize warping.
7. PEEK (Polyether Ether Ketone)
● Strength: Extremely strong and heat-resistant (up to 260°C).
● Features: High chemical resistance and mechanical strength.
● Best For: Aerospace, medical, and high-performance industrial parts.
● Printing Tips: Requires a high-temperature 3D printer (360–400°C) and an enclosed chamber. Not beginner-friendly.
8. ABS (Acrylonitrile Butadiene Styrene)
● Strength: Strong and durable.
● Features: Good impact resistance and heat tolerance.
● Best For: Functional parts, automotive components, and toys.
● Printing Tips: Print at 220–250°C with a heated bed (90–110°C). Use an enclosure to prevent warping.
9. PLA+ (Enhanced PLA)
● Strength: Stronger and more durable than standard PLA.
● Features: Easy to print, biodegradable, and available in various colors.
● Best For: General-purpose parts, prototypes, and decorative items.
● Printing Tips: Print at 190–220°C with a heated bed (50–60°C). No enclosure needed.
10. PEI (Polyetherimide)
● Strength: Extremely strong and heat-resistant.
● Features: High chemical resistance and flame retardancy.
● Best For: Aerospace, medical, and high-temperature applications.
● Printing Tips: Requires a high-temperature printer (340–380°C) and an enclosed chamber. Advanced users only.
Which Filament Should You Choose?
● For Beginners: PETG or PLA+ (easy to print and strong enough for most applications).
● For Advanced Users: Polycarbonate, Nylon, or Carbon Fiber Reinforced filaments.
● For Extreme Performance: PEEK or PEI (requires specialized equipment).
Pro Tips for Stronger Prints:
1. Optimize Infill: Use 50–100% infill for maximum strength.
2. Layer Adhesion: Increase extrusion temperature slightly for better layer bonding.
3. Orientation: Print parts in the orientation that maximizes strength for the intended load.
4. Post-Processing: Annealing (heat treatment) can improve strength for certain filaments like PLA or ABS.
Conclusion
For most home users, PETG and nylon offer a great balance of strength, ease of printing, and affordability. If you need extreme strength and have a high-temperature printer, polycarbonate or carbon fiber-reinforced filaments are excellent choices. For flexibility, TPU is unmatched. Always consider your printer's capabilities and the specific requirements of your project when choosing a filament. If you want to save time and effort, and avoid the cost of purchasing Filament, then JLC3DP is undoubtedly your best choice!
Keep Learning
Why MJF Nylon Parts Feel Weak: Strength vs Stiffness vs Finish
If MJF nylon parts feel weaker than expected, it’s usually not because “MJF isn’t strong.” It’s because strength, stiffness, and surface finish are being lumped together as one vague idea of quality. They’re not the same thing. A part can be stiff but brittle. Strong but visually rough. Smooth but mechanically average. Understanding how these properties actually behave in Multi Jet Fusion, and how different nylon grades shift the balance, is the difference between parts that just look good and parts t......
PA12 vs PA12s 3D Printing Comparison: The Truth!
PA12 and PA12S are basically the two standard nylons you’re going to run into most, particularly in Multi Jet Fusion (MJF) and Selective Laser Sintering (SLS). At first glance, they may appear interchangeable because both are engineering-grade nylon 12 powders, both deliver strong mechanical performance, and both are common choices for functional parts. In practice, however, their behavior differs in ways that matter to engineers. Comparing PA12 vs PA12S is not about asking which is “better” or “worse......
MJF Tolerances & Dimensional Accuracy: What Engineers Expect
Warped edges, misaligned holes, and functional misfits are often caused by variations in MJF tolerances rather than random printing errors. If you’re printing with HP Multi Jet Fusion and running into tolerance or dimensional issues, it’s rarely “bad luck.” It’s almost always something happening inside the MJF process itself. MJF is known for repeatability, but tolerances don’t “take care of themselves.” Shrinkage, thermal gradients, part orientation, and feature design quietly stack the odds for—or a......
Glass-Filled Nylon 3D Printing: Master It in 2 Minutes
What Is Glass-Filled Nylon? Glass-filled nylon is basically a nylon base reinforced with chopped glass fibers, and that addition completely changes how the material handles a real-world load. In the shop, that reinforcement is what stands between a part that slowly creeps, flexes, or warps, and one that actually holds its shape and tolerances over time. It’s the reason you see it used so often for structural brackets, housings, and fixtures, basically anything that has to survive constant heat, vibrat......
What Is Nylon Material? Stop Guessing Types and Applications
3D Printing Nylon: Challenges, Solutions, and Applications Printing Challenges with Nylon When it comes to 3D printing, everyone mentions PLA or ABS, but what is nylon? This high-performance engineering polymer excels where standard plastics fail. However, printing with nylon comes with challenges. The biggest issue is that nylon is extremely hygroscopic. It absorbs moisture directly from the air as soon as it’s exposed. If you try printing with wet filament, the results can be disastrous: 1. Bubbles ......
Why MJF Filament Doesn't Exist: Powder vs. Filament Explained
What Searchers Really Want to Know Users frequently ask questions like “Does HP MJF use filament?” or “Can MJF print nylon filament?” because they want the strength and quality of Multi Jet Fusion (MJF) on their FDM printers. This search for "MJF filament" reflects a desire to access premium MJF material properties easily. Need any MJF prototyping service? 3D printing service expert JLC3DP can help you turn your ideas into life. Get professional MJF printing starting from just $1, with fast lead times......