BGA 0.4 mm pitch - can you do it? What are your recommendations?
BGA 0.4 mm pitch - can you do it? What are your recommendations?
33*******3C
2023-11-22 01:51 AM
Dear support team, con you make the PCB (4-6 layers) with BGA footprint as follows:
Pitch 0.4 mm
Pad diameter 0.25mm
Via/Hole 0.15mm
Annular ring 0.05mm
Trace width 3.5 mils?
I took the values from your "capabilities" section on the web. I'd like to make sure that it's acceptable by you.
Below, you can see the screenshots illustrating of our needs.
What can be your recommendations for manufacturing a PCB with a BGA footprint we need to use: 0.4mm pitch, 0.21-0.25mm pad diameter.
Thank you!
Sergiy
Hardware Designer.
JLCPCB
2023-12-02 16:27 PM
As long as the PCB design is within our capacity, it is okay to make it.
We have detailed explained the capacity with BGA, please check the link here: https://jlcpcb.com/help/article/243-BGA-Design-Guidelines---PCB-Layout-Recommendations-for-BGA-packages
And please kindly note that only when the copper weight is 1oz, can the minimum trace width be 3.5mis.
We also recommend to enlarge the trace width if possible.