6 Fixes for 3D Print Under-Extrusion & Gaps: Causes & Pro Tips
6 min
If your 3D print looks like swiss cheese… Read this.
You’re excited. Your slicer preview looks solid. You hit print, only to watch your part emerge with strange gaps in the walls, weird holes between lines, or the dreaded under-extruded spaghetti.
Gaps in 3D prints are a common frustration, especially for beginners, but they’re not random. They’re signals from your machine that something’s off: the flow, temperature, speed, or settings. The good news? Most of these issues are fixable.
In this guide, we’ll walk you through the exact causes of gaps in 3D prints and under-extrusion, how to identify them, and how to get your prints back to looking clean, strong, and professional.
What Do We Mean by 3D Print Gaps and Under-Extrusion?
Let’s quickly define a few terms so you know what we’re fixing:
a. 3D printed under-extrusion: Your printer is not pushing out enough filament to form solid layers.
b. 3D printed gaps in walls: Visible spaces between perimeters (especially in thin walls).
c. 3D printed gaps between lines: Voids between adjacent lines in infill or top surfaces.
d. 3D printed gaps in the first layer: Poor adhesion or missing areas at the base of your print.
e. 3D printed gaps in layers: Layers that don’t bond well, sometimes resulting in splitting.
Why Are There Gaps in My 3D Print?
Here are the top culprits:
1. Your Nozzle Can’t Keep Up (Partial Clogs)
(source: reddit)
Even a partial blockage can prevent your extruder from feeding a steady stream, causing “3D print under-extrusion”. Dust, old filament residue, or low-quality filament can cause this.
Fix it:
a. Do a cold pull to clean the nozzle.
b. Try printing a simple extrusion test.
c. Use high-quality filament (this matters more than you think).
2. Incorrect Extrusion Multiplier or Flow Rate
Too little material = visible gaps in 3D prints (perimeters and infill).
Fix it:
a. Increase your extrusion multiplier/flow rate slightly (start with 5%).
b. Print a single-wall calibration cube to dial it in accurately.
3. Print Temperature Is Too Low
(source: Pexels)
Filament doesn’t flow well at the wrong temp, leading to you 3d printing gaps in layers.
Fix it:
a. Check the manufacturer’s recommended temp range.
b. Bump up the temp in 5℃ steps until extrusion improves.
c. Watch your filament’s surface, glossy? Too hot. Matte and stringy? Too cold.
4. Inconsistent Filament Diameter
(source: istock)
Cheap filament may have uneven thickness, which throws off your flow rate.
Fix it:
a. Use digital calipers to measure the diameter in multiple spots.
b. Input the actual average diameter into your slicer (don’t trust the label blindly).
c. Consider switching to a filament with tighter quality control.
5. Wall and Infill Settings Are Misaligned
(source：freepik)
Sometimes your walls and infill don’t “meet up” properly, leaving a small unfilled region.
Fix it:
a. Try "infill overlap" settings in your slicer (e.g., 10–20%).
b. Increase wall line count or adjust wall thickness to be a multiple of your nozzle size.
6. Too Fast, Too Furious
High speeds can lead to filament skipping or missed steps, especially with Bowden setups.
Fix it:
a. Slow down your print speed (especially outer walls and top layers).
b. Check your extruder tension. Is it gripping the filament firmly?
Still can’t fix the gaps and need to get your parts printed urgently? Upload your design file and receive an instant quote from JLC3DP. We’ll get your prints professionally printed, smooth, and perfect.
Quick Fix Table: Causes vs. Fixes
| Issue | Common Cause | How to Fix |
| Gaps in walls | Low flow rate, thin walls | Increase flow or wall line count |
| Gaps in top layers | Low infill %, poor overlap | Raise infill %, increase top layers |
| Gaps in first layer | Bad bed leveling, temp too low | Re-level bed, adjust nozzle temp/height |
| Gaps between infill lines | No infill overlap | Enable/raise infill overlap in slicer |
| Inconsistent extrusion | Partial clogs, bad filament | Clean nozzle, change filament |
Real-Life Case Study
Ali, a product designer prototyping custom cases for Raspberry Pi builds, kept running into weak top layers and wall gaps, especially on functional parts.
After a few failed prints, he:
Ran a cold pull to clear minor clogs.
Adjusted his infill overlap to 15%.
Switched to JLC3DP's better-quality filament.
Recalibrated his flow rate using a single-wall cube.
The result? Crisp perimeters, clean top layers, and solid parts that didn’t crumble under stress.
If you're printing functional or precision parts, using higher-quality material and tweaking your slicer profile can make all the difference. Services like JLC3DP’s 3D printing service help when you want pro-level results without the tuning headaches.
If you’re facing a print that’s also refusing to stick properly? Check out our guide on how to remove a 3D print stuck to the bed, bed adhesion problems can mimic extrusion issues.
FAQs: Gaps and Under-Extrusion in 3D Printing
Q: Why does my first layer have gaps?
A: It’s usually poor bed leveling or too fast of a first layer speed. Also check that your nozzle is close enough to the bed.
Q: Are small gaps okay?
A: Occasionally, yes. But consistent or large gaps affect structural strength and aesthetics. Better to fix them.
Q: How do I test for 3D print under-extrusion?
A: Print a single-wall cube and measure the thickness. If it's significantly smaller than expected, you’re under-extruding.
Q: What if I’ve tried everything and still get gaps in 3D prints?
A: It might be time to inspect your extruder gear, replace your PTFE tube, or even upgrade your hotend.
Final Thought: Don’t Settle for Gaps
Gaps in 3D prints don’t mean you’re a bad printer, just that your machine is giving you feedback.With the right tweaks and a bit of observation, you can eliminate under-extrusion issues for good. And if your part really matters (like a test-fit, mold, or functional part), remember you can always fall back on professional help. JLC3DP’s 3D printing service can deliver precise, gap-free prints, no calibration required.
Keep Learning
Transparent & Clear 3D Printing Guide: Filaments, Tips & Tricks
(source: AI) Most “clear” 3D prints aren’t fooling anyone. They come out looking more like yellow frosted bathroom glass than crystal-clear acrylic. But don’t give up hope just yet. With the right materials, printer settings, and a little post-processing finesse, you can achieve that see-through, polished look that turns heads and gets the job done. So why does clear 3D printing matter? Because transparency isn’t just for show. Engineers use it to prototype fluid channels, optics labs print light guid......
How to 3D Print Temperature Tower for Temp Test
A few degrees can be the difference between a flawless part and a wasted spool of filament. Too hot, and you’ll see drooping edges, stringing, or detail loss. Too cold, and layers won’t bond properly, leaving brittle parts that can crack under stress. That’s why dialing in the right print temperature isn’t guesswork, it’s a controlled process. The most common method is running a 3D print temperature test, often with a temp tower, which reveals exactly how your material performs across a range of setti......
How to Calibrate Your 3D Printer for Dimensional Accuracy
When Dimensional Accuracy Really Matters When it comes to precision 3D printing, it’s not just about clean layers or smooth surfaces; dimensional accuracy is what separates prototypes from production-ready parts. If you're printing mechanical components, functional assemblies, or anything that needs to fit, align, or move, dimensional accuracy in 3D printing is non-negotiable. Think of it this way: a. A 3D printed gear with even a 0.3mm deviation might skip teeth or lock up entirely in a transmission.......
How to Replace a 3D Printer Nozzle Safely & Easily
A clean, healthy nozzle is the heart of every good 3D print. But over time, even the best ones wear down, a little abrasion here, a bit of filament buildup there, and suddenly your printer’s perfect flow starts acting up. That’s when 3D printer nozzle replacement steps in as your best fix. (source: Reddit) A worn or damaged nozzle can cause all kinds of chaos: inconsistent extrusion, clogging, stringy prints, and rough or uneven layers. You might even notice the print surface looking a bit dull, or ra......
3D Printer Cold Pull Guide: Clean Nozzles in Minutes
Few things kill your print quality faster than a clogged nozzle. One minute your layers are smooth and perfect, and the next, you’re staring at a half-finished mess of under-extrusion and spaghetti filament. But here’s the good news: you don’t need to disassemble your hotend or spend hours troubleshooting. The fix is simple. A cold pull. (source：Reddit) If you’ve ever wondered what a cold pull is in 3D printing, it’s basically the simplest, most effective way to clear out debris, burnt filament, and m......
Why Your 3D Printer Isn’t Extruding and How to Solve It
You hit Print, the bed warms up, the nozzle homes, the gantry starts its dance… and nothing comes out. No bead, no first layer, just an air print. Few things are more maddening in 3D printing than a 3d printer not extruding when you’re ready to go. This guide tackles the big failure modes you’re likely seeing: a 3d printer not extruding at start, a 3d printer stops extruding mid point, or generally weak, inconsistent flow where the filament's not extruding the way it should. We’ll show you exactly why......