3D Printing Brims, Skirts, and Rafts: How to Use Them?
4 min
3D printing warping is a common problem in 3D printing. In order to effectively prevent warping at the bottom of the part and increase the adhesion of the build plate, 3D printing brims, skirts, and rafts are usually designed based on the printed object. So what are they and how to choose? This article will help you solve this problem.
Source: https://3dprintmentor.com/3d-printing-raft-vs-brim-vs-skirt/
What are brims, skirts, and rafts in 3D printing
3D printing brim is a series of lines printed around the bottom of the model, forming a large ring, similar to a brim. These lines increase the surface area of the first layer and help to firmly fix the model to the build plate. Its purpose is to improve adhesion and minimize warping, and it is used for models with small bases or sharp corners that are prone to warping. The brim and the bottom of the model are parallel and can be easily removed after printing.
3D printing skirt is a contour printed around the model, but does not touch the model, so it has no effect on structural support. The purpose of the skirt is to test the nozzle, adjust the filament flow rate, and verify that the print bed is level to prevent warping problems.
3D printing raft is a flat, grid-like structure that is printed underneath a model. It provides a solid foundation, especially for models with uneven or small bases. The purpose of a raft is to provide a stable platform and enhance adhesion, making it best suited for large prints, materials that are prone to warping, or uneven build surfaces. Rafts are printed directly underneath a model, but are more difficult to remove than brims and skirts.
How to choose
Use a 3D printing brim when printing with materials like ABS or PETG that are prone to warping, or when your model has a small contact area with the build plate. Brims provide additional adhesion without complicating post-processing. For models that already have excellent adhesion, testing filament flow and consistency before starting a print, ensuring proper bed leveling, and 3D printing skirts are recommended for troubleshooting. Use a 3D printing raft when printing with materials like nylon or flexible filament TPU that require additional stability, or when working on build plates that have bonding issues or printing models with uneven or small bases.
Optimize settings
Brims
Brims can be understood as a special type of skirt in slicing software (set the distance of the skirt to 0 from the edge of the part). In most slicer settings, the default width of the brim is about 8 mm. Generally speaking, the wider the brim, the better the first layer adhesion, but it also consumes more material. After printing, the brim can usually be peeled off manually to minimize surface marks. If the edge removal leaves marks on the printed part, sanding can help smooth the edge.
Skirts
Slicing programs provide a variety of skirt settings, including line count, distance, and number of layers. Increasing the number of lines helps to confirm the initial settings of the print, the skirt distance controls its separation from the part, and the number of layers is usually one layer, but multi-layer skirts are easier to remove. When printing, the skirt is used to pre-condition the nozzle and is easily removed after completion without being attached to the printed object. If removal is difficult, increase the number of skirt layers or use a scraper to assist.
Rafts
Most slicing software comes with a raft design function, and users do not need to create it manually. The key parameters of the raft include layer thickness, air gap, extra margin, and print speed. The bottom layer is the thickest to enhance adhesion, and the top layer thickness matches the printed layer. The extra margin increases the raft area, thereby improving stability, and reducing the print speed helps improve the adhesion of the raft. The air gap is critical for removing the raft. It is the air between the top layer of the raft and the bottom layer of the print, which weakens the adhesion between the two. If the raft is found to have fused to the print, it may be because the printing temperature is too high.
By properly selecting and optimizing the 3D printing brim, skirt and raft, the problem of printing warping can be reduced and the printing success rate can be significantly improved. If you need to print a complex model using a material that is prone to warping, JLC3DP's high-quality 3D printing service can help you solve possible problems in post-processing and provide full support for your creativity!
Keep Learning
How to prevent 3d printing warping problems
3d printing warping is one of the most common problems faced by 3d printing enthusiasts. Especially when printing larger models, the printed parts initially adhere to the print bed, but then the edges of the prints lift off the print bed and curl, causing the model to deform and waste material. The main reason for warping is that plastic materials cool and shrink when printed, which causes deformation. This article will analyze the causes of warping and use suggestions to prevent 3d printing warping t......
Getting Smoother Curves: Understanding Non-Planar 3D Printing
Image via: Pexels by Jakub Zerdzicki Visible layer lines commonly known as stair-step effect can be an issue on your curved or sloped surfaces 3D printed parts. This common challenge in additive manufacturing affects both the look and sometimes the strength of your components. Non planar 3D printing is a developing technique that directly addresses this problem by changing how layers are applied. This article will help you understand the following about non planar 3D printing: ● What it means and how ......
Can You 3D Print a Key? Legal Risks, Materials & 3D Printing Tips
(Freepik) Thinking of a fun and functional project? Or afraid of losing your keys and wondering if your 3D printer can save the day? You’re not alone. 3D printing keys has become a hot topic in maker forums and locksmith circles alike. Whether it’s a house key, a car key fob shell, or a custom-designed lock, the idea of duplicating or prototyping a key using just plastic filament and a CAD file is incredibly tempting. But the problem is: printing keys isn’t always legal, it doesn’t always work, and de......
Achieve Faster 3D Printing With These Simple Tips
Image via: Pexels by Fox Many users, particularly those with popular desktop FDM printers, want to know how to get faster 3d prints. Making 3d printing faster means quicker project completion and more efficient iteration. This article provides answers on how to increase your printer speed, especially your PLA printing speed. It also explains when using a professional 3D printing service is a more effective approach for achieving fast 3d prints with high quality. Here’s what this guide covers: ● Settin......
Best Resources for Beginners to Learn 3D Printing
(source: Freepik) Getting started with 3D printing is both exciting and overwhelming. With so many books, tutorials, software tools, and printers available, aspiring beginners often don't know where to begin. Whether you're a hobbyist curious about 3D printing or a student exploring the world of additive manufacturing, having the right resources and a reliable guide can make all the difference. In this article, we’ll walk you through the 3D printing basics and show you how to build a solid foundation ......
Busting 7 Myths About 3D Printing with Real Facts
You've probably seen the Reddit threads, the YouTube “experts”, all parroting the same tired 3D printing myths. Some say 3D printing is expensive. Others call it dangerous. Some act like you can print a car in your garage by Friday. 3D printing is powerful tech, but if you’re working off bad info, you’ll waste time, money, and maybe even risk safety. In this post, we’re busting 7 of the most common myths with real 3D printing facts, and giving you the clarity you need before you start your next print.......