Key Tips for Storing and Drying 3D Printer Filament
4 min
- Effects of Moisture on Filament Materials
- How to store filament
- How to deal with damp filament
When it comes to Fused Deposition Modeling (FDM) printing, the quality of your filament plays a crucial role in achieving successful prints. Filament is the primary material used in FDM printers, and its properties significantly impact the printing process and the final product. However, improper storage can compromise filament quality, leading to printing failures. Therefore, ensuring that your 3D printer filament is stored correctly and kept dry is essential for a smooth printing experience.
Effects of Moisture on Filament Materials
The effects of moisture on filament materials are an important consideration in 3D printing. Here are some of the possible effects:
Increased brittleness: When filament absorbs moisture, its structure becomes fragile and prone to breaking during the printing process, which can lead to print failures and material waste.
Degraded print quality: Moisture-absorbing filaments may cause blistering, poor interlayer bonding, and rough surfaces. These issues can affect the appearance and function of the finished product.
Clogged nozzles: Moisture-containing filaments produce steam when heated, which can cause nozzle clogging, affecting the normal operation of the printer.
Discoloration of materials: Moisture can cause some filaments to change color and appearance, affecting the appearance of the final item.
Degraded thermal performance: Moisture affects the melting characteristics of the filament, which can cause unstable temperature and fluidity during printing, further affecting the printing effect.
Wet filament can cause stringing in 3D prints
Source: https://3d4create.com/blogs/news/how-to-dry-pla-filament-5-easy-fixes-for-wet-plastic
How to store filament
To store filament materials effectively, it's crucial to keep them dry and suited to their specific properties. For moisture-sensitive filaments like nylon and TPU, using airtight containers with silica gel packets is essential, as these materials can absorb humidity quickly. For PLA, which is less prone to moisture absorption, a simple sealed bag may suffice if stored in a cool, dry place. However, regardless of the filament type, maintaining a stable temperature and avoiding direct sunlight is important. For long-term storage, vacuum sealing the spools can provide an additional layer of protection against moisture and environmental factors. If a filament becomes damp, using a filament dryer or an oven at low temperatures can help restore its usability.
Source: https://beckystern.com/2024/02/25/how-to-keep-your-3d-printer-filament-dry/
How to deal with damp filament
To handle damp filament, there are several effective methods you can employ to restore its usability. First, if you have access to a filament dryer, this is often the most efficient solution. These devices are designed to remove moisture by gently heating the filament, which allows it to dry out without damaging it. Set the dryer to the appropriate temperature for the specific filament type—typically around 50°C for PLA and PETG, and higher (up to 75°C) for nylon.
If a filament dryer is not available, you can use a conventional oven as an alternative. Preheat the oven to a low temperature (around 50°C or 122°F), and place the filament on a baking tray. Keep a close eye on it, as prolonged exposure to higher temperatures can cause it to melt. Leave it in the oven for a few hours, checking periodically to ensure it doesn't overheat.
Another option is to place the damp filament in a sealed container with desiccants, such as silica gel packets, which absorb moisture from the air. Leave it for several hours or overnight to allow the desiccants to work. After drying, make sure to store the filament properly in airtight containers to prevent future moisture absorption. Regularly checking and maintaining your filament storage conditions will help you avoid issues with damp filament in the future.
Source: https://www.reddit.com/r/3Dprinting/comments/7ohoed/filament_dryer/
In conclusion, proper storage and handling of 3D printer filament are crucial for ensuring the best printing results. At JLC3DP, we prioritize quality in every aspect of 3D printing, from our materials to our printing processes, to successfully print a product that meets your expectations.
Popular Articles
Keep Learning
PA11 vs PA12: Key Differences and How to Choose for 3D Printing
Quick Answer Pick PA11 when the part must flex, absorb impact, or when bio-based sourcing matters. Pick PA12 when you want the established, balanced default that is widely available. The difference between pa11 vs pa12 comes down to chemistry and economics more than to a winner and a loser. PA11 has eleven carbons in its repeating unit and is traditionally made from castor oil, which gives it a bio-based story and a slightly higher melting point. PA12 has twelve carbons and is conventionally petroleum......
ABS 3D Printing: Settings, Warping & Acetone Smoothing
Key Takeaways ABS 3D printing succeeds or fails on three controls: bed heat, drafts, and cooling airflow. A typical working setup is a 230–250°C nozzle, a 90–110°C bed, and the cooling fan off. Warping comes from uneven cooling, so the countermeasures rank in priority order: an enclosure that holds warmth does more than any glue trick, and a brim of five or more outlines rescues stubborn corners. The cooling fan is the counterintuitive setting. PLA habits say open it up; ABS says leave it closed, beca......
What Is PEEK Filament? High-Performance 3D Printing Explained
PEEK (Polyether Ether Ketone) is not your average 3D printing filament. It’s the powerhouse of engineering-grade thermoplastics, offering strength, chemical resistance, thermal stability, and durability that rivals even some metals. But can you really 3D print with PEEK? Absolutely, if you know what you're doing. In this guide, we’ll explore what PEEK filament is, the challenges of 3D printing PEEK, where it excels, and how to prepare for using it in advanced applications. What Is PEEK Filament? PEEK ......
Why Use PEEK 3D Printing? Benefits, Applications & Challenges
Most engineering materials get chosen because they're available, familiar, or cheap. PEEK gets chosen because nothing else works. When an engineer specifies PEEK 3D printing, it's almost always because the part needs to survive conditions that would disqualify every other plastic on the shortlist, sustained heat above 200℃, aggressive chemicals, sterilization cycles, or mechanical loads that other polymers handle poorly over time. PEEK 3D printed parts aren't “prototype outputs”. They're functional en......
Choosing the Right ESD Filament for Your Application
Introduction Somewhere in an electronics assembly facility right now, someone is printing a fixture on a desktop 3D printer using standard PLA. It looks fine. It fits the board. And every time a PCB gets placed in it, static charge builds on that perfectly smooth, perfectly insulating plastic surface, right next to components sensitive to discharges that humans can't even feel. ESD filament exists specifically for this problem. It's not a premium upgrade to standard filament. It's a different material......
ESD Plastic Materials: A Practical Guide for Engineers
Key Takeaways ESD plastic controls charge: It uses conductive or dissipative additives to let static charge flow away safely instead of building to a damaging discharge. Three categories by resistivity: Conductive (<10⁵ Ω/sq), static dissipative (10⁵–10⁹ Ω/sq), and anti-static (10⁹–10¹² Ω/sq) each serve different roles. Static dissipative is the usual target: Most electronics handling fixtures use the 10⁶–10⁸ Ω/sq range for controlled, non-damaging dissipation. Match material to the full application: ......