How to Get Better Overhangs in 3D Printing - Complete Fix Guide
5 min
Why 3D Printing Overhangs Matter (and Why They’re So Frustrating)
(Source: ABCD4WS via Reddit)
Ever printed a model and noticed parts drooping, curling, or turning into stringy disasters mid-air? That’s an overhang issue.
Overhangs are parts of a print that jut out beyond previous layers, meaning they have little to no material beneath them for support. If not handled properly, they result in poor surface quality, failed prints, or ugly warped edges.
Real-World Example:
Say you’re printing a figurine with an outstretched arm. Without the right support or slicer tweaks, the arm curls upward or sags, ruining the aesthetics and precision. Sound familiar? Let’s fix it.
3D Printing Overhanging Angle
(Source: Instructables)
In FDM printing, an overhang occurs when a layer extends beyond the footprint of the previous layer. Your printer is essentially trying to print “in mid-air.”
The steeper the overhang, the harder it is to print cleanly, especially beyond 45°. This is where problems like sagging, poor layer adhesion, or overhang curling arise.
What’s the Ideal 3D Printing Overhang Angle?
The general rule:
Overhangs up to 45° print cleanly on most FDM printers
Above 45°- 60° starts to challenge cooling and bridging
Beyond 60°+ almost always needs support or advanced tuning
Want to test your printer’s limits? Run a 3D printing overhang test model from Thingiverse or Printables. It helps you visually see where the quality drops off, a great diagnostic tool.
Common 3D Printing Overhang Issues & How to Solve Them
1. 3D Print Overhang Curling Up
(source: grabcad)
If the edge of your overhang curls upwards mid-print, it’s usually caused by inadequate cooling.
Fixes:
a. Use a part cooling fan (and ensure it’s working!)
b. Lower print temperature slightly (e.g., 5 - 10°C)
c. Add support structures if overhang is too steep
d. Enable “Z-hop” to avoid nozzle collisions
2. Gaps or Rough Surfaces on Overhangs
(Source: shawnsblog via Reddit)
This usually results from poor bridging performance or not enough layer time to solidify.
Fixes:
a. Slow down print speed for overhangs (try 15 - 25 mm/s)
b. Enable “Detect Overhangs” in slicer if available
c. Increase cooling (fan speed to 100%)
d. Reduce layer height to improve detail
3. Overhang Sagging
(Source: Raise3D)
Material starts drooping because gravity wins when there’s no support underneath.
Fixes:
a. Print with supports (especially for angles > 60°)
b. Use “Support Overhang Angle” setting wisely (more below)
c. Use filaments that hold shape better (like PLA over ABS)
Using the Right Support Overhang Angle
Your slicer (like Cura or PrusaSlicer) will have a setting called “3D Printing Support Overhang Angle”. This tells the software at what overhang angle to generate supports.
Typical setting:
Support Overhang Angle = 55°- 60°
Meaning: anything steeper than 60° will have supports automatically added.
Pro Tip:
Try painting supports only where needed. Don’t let your slicer flood the whole model.
If you’re still struggling with unpredictable overhangs or curling despite trying every setting tweak, it might be time to check if the issue lies in inconsistent filament quality or printer calibration. At JLC3DP, we use industrial-grade machines and controlled settings to eliminate guesswork for clients who want clean overhangs and flawless prints, no babysitting required. Get a free quote!
3D Printing Materials & Their Overhang Behavior
| Filament | Max Angle (w/o supports) | Overhang Quality | Cooling Required |
| PLA | 55–60° | Excellent | High (100%) |
| PETG | 45–50° | Good (prone to stringing) | Moderate to High |
| ABS | 40–45° | Poor (warping likely) | Low (enclosure better) |
| Nylon | 35–45° | Poor (flexible) | Moderate |
Still seeing gaps between walls or weak, stringy infill in your overhangs? These can actually be symptoms of under-extrusion. Check out our full guide on how to avoid gaps and under-extrusion in your 3D prints for practical fixes.
Design Tips to Improve Overhang Printing
Chamfer or fillet overhanging edges instead of sharp angles
a. Add support blocks in CAD to control where they generate
b. Orient the model to reduce extreme overhangs (lay flat when possible)
c. Consider bridging instead of overhanging if it spans across two points
Best Overhang Settings for Cura / PrusaSlicer
Cura:
a. Enable “Enable Print Cooling”
b. Set “Support Overhang Angle” to 55°
c. Adjust “Minimum Layer Time” to 10-15 seconds
d. Use “Adaptive Layers” for finer detail near overhangs
PrusaSlicer:
a. Set “Fan Speed” to 100% for PLA
b. Set “Support Style” to Grid or Snug
c. Try “Detect Bridging Perimeters”
FAQs: Your Overhang Questions Answered
Q: Why does my 3D print overhang curl up?
A: Usually due to poor cooling. Make sure your fan is running at full speed and your print temp isn’t too high.
Q: Can you 3D print a 90° overhang?
A: Technically yes, but only with support structures or specialty printers like SLA. On FDM? You’ll likely get a spaghetti mess.
Q: How do I test my 3D printer’s overhang capabilities?
A: Download an “Overhang Test” print from Thingiverse and observe where quality starts to degrade.
Q: Which filament is best for 3D printing overhangs?
A: PLA is the easiest to manage due to its stiffness and cooling friendliness.
Final Thoughts
Overhangs are one of the ultimate skill checks in FDM 3D printing. But once you understand how angles, cooling, support, and slicing interact, you’ll start getting beautiful bridges, clean arches, and no more curling edges.
Need precision parts that push overhang limits?
Try our online 3D printing service, with expert slicing and tuned printers, we handle overhangs like pros.
Keep Learning
10 Things You Should Never 3D Print
(source: Freepik) 3D printing opens the door to creativity, customization, and convenience, but not everything should be on the print bed. While the tech keeps getting better, safer, and more accessible, there are still clear boundaries, legal, ethical, and material-based, that shouldn’t be crossed. Whether you're just starting out or you're knee-deep in STL files, it’s important to know where the line is between a clever print and a costly mistake. Here are 10 things you should never 3D print, and ex......
3D Printer Fire Safety: Risks and How to Protect Your Prints
Till this day, users on Reddit share how their 3D printer caught fire when left unattended. Luckily, some showed up in time. But not everyone is that lucky. In fact, according to fire safety reports, 3D printers are responsible for dozens of documented home fires every year. Even if the chances are 1 in 1,000. That raises the question: how real is the risk of a 3D printer fire, and how much is myth? In this blog, we’ll cut through the noise with: a. 3D printer fire myths vs reality b. Clear fire preve......
How to Get Better Overhangs in 3D Printing - Complete Fix Guide
Why 3D Printing Overhangs Matter (and Why They’re So Frustrating) (Source: ABCD4WS via Reddit) Ever printed a model and noticed parts drooping, curling, or turning into stringy disasters mid-air? That’s an overhang issue. Overhangs are parts of a print that jut out beyond previous layers, meaning they have little to no material beneath them for support. If not handled properly, they result in poor surface quality, failed prints, or ugly warped edges. Real-World Example: Say you’re printing a figurine ......
Top 3 Dangers When Using a 3D Printer
3D printing is often seen as a clean, hands-off process, load the file, hit print, and watch your design take shape. But behind that glossy surface, there are risks that rarely make it into beginner guides or product marketing. Most printers don’t come with a safety manual beyond the basics, and that’s where people get too comfortable. If you’re regularly using a 3D printer, at home, in a workshop, or at your business, it’s crucial to understand what you’re really working with. Because yes, 3D printin......
Health Risks of 3D Printing: Toxic Fumes & Other Hazards
3D printing has changed the way we prototype, create, and manufacture. But let’s get one thing straight, just because something is high-tech doesn’t mean it’s risk-free. As printers get more affordable and more people dive into home setups or scale into print farms, there’s one question that often goes ignored: Is 3D printing dangerous? Let’s break it down, especially if you're printing in your bedroom, garage, or workspace without proper safety measures. (source: AI-generated) The Hidden Reality Behi......
3D Printer Enclosure: Why Do You Need One?
3D printer enclosure can provide a stable printing environment for your printer and improve your printing results. This article will introduce the advantages of 3D printer enclosure and how to build a 3D printer enclosure. 3D Printer Enclosure Advantages Maintain a Stable Printing Environment The enclosure helps maintain the temperature required for the printing process and reduces temperature fluctuations, thereby reducing warping problems caused by uneven shrinkage, especially when printing material......