Exact Build Up of PTFE 0.76mm PCB

Hello,

For simulation purposes I need to know the exact thickness parameters of the PCB layers.

In this case it's about 0.69mm 2 layer PTFE Teflon PCB with ZYF300CA-C material.

I need to know the following parameters:

Please correct me if I'm wrong and tell me the missing information.

Soldermask                         - >=10um

Gold - thickness 1U"         -> 0.0254um

Emmersion Nickle             - thickness (information MISSING)

Copper - thickness 1oz    -> 35 um

ZYF300CA-C                     - thickness 0.69mm

Copper (in my case on this side is no copper) - no thickness

Emmersion Nickle             - due to no copper not used

Gold                                   - due to no copper not used

Some of the values I calculated or took from another very similar question.