Q&A Community - JLC3DP

Multiple designs on single Stencil

I have two PCB designs, that when combined, would both fit on a stencil (360mmx200mm valid area). How would I go about hav......

1 Reply Asked by 86*******5A

Flex PCB for directly soldering to another board

Hello, is it possible manufacture golden fingers on flexible pcb for directly soldering to another board? Sample in pictur......

1 Reply Asked by 26*******9A

Face detector

Want a face detector pcb with components

1 Reply Asked by 95*******4A

Graving a burnt PCB

Good evening, Can you tell me if it's possible to send you a PCB with burnt but still visible traces (sending a single-lay......

1 Reply Asked by 25*******2A

1.8mm thickness

I would like to make the thickness of the PCB 1.8mm.

1 Reply Asked by 69*******7A

What is the breakdown voltage of the dielectric in a JLCPCB aluminum PCB?

We are planning to use a 1mm thick aluminium PCB as a thermal spacer between Mosfets and heatsink in a mains powered inver......

1 Reply Asked by 61*******2A

How much time ENIG finished boards in a vaccum sealed pack will keep its soldering characteristics?

Hello, I need to know how long boards with ENIG finishing in a vacuum sealed package will maintain their soldering charact......

1 Reply Asked by 30*******9A

0.5mm pitch BGA - how to setup for manufacturing in KiCad

Hello, in our application we use 0.5mm pitch BGA package. I read this article https://jlcpcb.com/help/article/BGA-Design-G......

1 Reply Asked by 72*******9A

minimum distance between hole of a via to round pad

For my project I'm using a component the T8F81C2 which has which is a 81-FPGA (5 x 5), here they recommend using pad sizes......

1 Reply Asked by 33*******2A

untented vias and HASL

Hi! What happens to untented vias (0.3mm drill, 1mm-thick 2-sided board) or open vias in pads when the board goes through ......

1 Reply Asked by 80*******7A

What is Your IPC Grade Standard for Rigid Circuit Boards?

Hello, On your blog, you have a page specifying that you adhere to IPC-6013 Class 2 for Flexible Circuit Boards: https://a......

1 Reply Asked by 25*******0A

PCB Oblong hole error

Hi Sir I was received the ordered 2 kind of sample PCBs. Thanks greatly for fast delivery and cheap price. But, there are ......

1 Reply Asked by 94*******9A

Press Fit Holes and File Upload

Hello, I saw you can do a press fit hole with 0.05mm tolerance. I will need that done for the next board I am doing. Where......

1 Reply Asked by 43*******3A

Reorder PCB and PCB assembly

The PCB assembly price includes the cost of: Setup fee, Stencil, PCB assembly ficture, and Feeders loading fee. How will t......

1 Reply Asked by 55*******2A

Flex Gold fingers with notches

Hello, Amphenol 59453 (SFVL) series require locking notches like these. Can you manufacture these?

1 Reply Asked by 26*******6A

Minimum spacing between electrical conduction tracts and heatsink pads on copper core PCBs

The minimum spacing for traces is 0.1mm. How much space must there be between a heatsink pad on copper core PCBs and a “no......

1 Reply Asked by 84*******0A

3D Barcode from batch to batch

If I want a repeat order, how do I amend the unique number inside the 3D barcode?

1 Reply Asked by 22*******0A

PCB outline bit size

Hi - I'd like to put some fine details on my board outline. What is the router bit size used to cut the board outline for ......

1 Reply Asked by 26*******2A

What does "Assembly difficulty" mean?

Some components has "Assembly difficulty" section in its page, but I'm not sure what "Assembly difficulty" means. Does thi......

1 Reply Asked by 79*******2A

ENEPIG Finish

Do you offer ENEPIG Finish?

1 Reply Asked by 49*******2A